New products
  • Bilux TWIN Powder Coated Polar-White only Bilux TWIN Powder Coated Polar-White only
    The lighting system is a high performance radiator for BILUX professional saltwater aquariums. The lamp, designed according to latest findings produced a series of exceptionally strong mixing light, which makes for a very good coral growth and gives both the natural colors of a hitherto unsuspected influence.

    The newly developed structure with optimized cooling surfaces includes two metal halide lamps, which are parallel and positioned in close proximity to one another under a common reflector. This fascinating light output is made possible by the high-gloss reflector material and the unique geometry of the complex designed reflectors. This is calculated and designed using CAD light distribution is a first in the aquarium lighting and is therefore suitable for the most demanding lighting solutions in the private and public sectors ..

    Both lights can be switched by external control devices individually from each other. In this way, the light output is reduced and the requirements are ideally suited. BILUX is available in version 250 / 250 Watt, 250 / 400 watts and 400 / 400 watts.

     
Your account
To access your account, please sign in:
Email:
Password:
Forgot your password?
Your currency
Xenia, integrated logistic and solution

See more about this article : H2Ocean Natural Reef Salt 23Kg Bucket

This article is in catégory : "Deltec > H2O DD High Performance Sea Salt Mix"


H2Ocean Natural Reef Salt 23Kg Bucket
stock  In stock

H2Ocean Pro+ is a new pro formula aquarium salt - produced by a solar evaporative process which produces a totally natural base salt where all of the main and trace elements are in complete balance as nature intended.

The pure natural salt is then specially enhanced for aquarium use by elevating specific elements that over time become depleted, such as calcium and magnesium which are used by corals and coralline algae for growth.

Free from Nitrate and Phosphate.

Ask for it at your local Aquarium store

 

PACK SIZE

6.6Kg Tub for 165 - 200 lts (14.55 lbs for 43-52 US Gallons)

 

CHEMISTRY

The formulation for H2Ocean+ salt has been developed by D-D following many months of testing and evaluation. The salt is designed to dissolve quickly and easily and to have a specific chemistry which in our opinion is the optimum formulation to maintain a healthy reef and allow regular water changes whilst maintaining a natural balance.

Calcium and Magnesium levels are boosted to replace that used up through coral growth within the aquarium whereas chloride levels are slightly lowered to allow post additions of calcium and magnesium chloride with a minimized affect on the chloride balance.

Parameters when mixed to a S.G: of 1.025 @ 25°C = 35.5 ppt


RO WATER

H2Ocean Pro+ salt is recommended for use with Reverse Osmosis water or soft water with a calcium level lower than 30 mg/l. As the calcium level in H2Ocean+ is already enhanced to 440 mg/l then mixing with hard tap water which contains additional calcium may raise the concentration above normal recommended levels and cause the calcium to precipitate out of solution.

RO water removes undesirable ions like phosphate and nitrate from your tap water which otherwise would contribute to nuisance algae in your aquarium.

D-D manufactures a range of Reverse Osmosis units which are available from your retailer.

 

MAGNESIUM PRO PLUS FORMULA

Many salts concentrate on boosting calcium levels and ignore magnesium levels.

Maintenance of the correct magnesium concentration is equally important in a reef aquarium and will make it much easier to maintain stable calcium, pH and alkalinity.

 

MIXING

Using a clean container

  • Add 1 Kg of H2Ocean+ to 24.2 litres of water ( 1 Lb to 2.9 U.S. Gallons )
  • Mix well until all of the salt is dissolved and the solution is clear.
  • We recommend that you aerate for 24 hours and bring to temperature before use.
  • Check the S.G. before addition to the aquarium.
  • If required add more salt or water to obtain the correct S.G. reading.
  • Remember that S.G. changes with temperature.